USER PROGRAMMING
Cappuccino milk steam timing
Follow the steps below to set the ratio of foam/hot milk for cappuccinos:
DOSE PROGRAMMING
IN 30 SEC.
Fig. 01
PUMP&STEAM TIMES
X.X s
Fig. 02
Note:
i
Selecting a longer (positive) pump time will create a foamier cappuccino, selecting a shorter (negative/delayed)
time will create in a milkier, less foamy cappuccino. Your specific milk fat/cream content, viscosity, temperature
and storage methods all impact foaming characteristics, so trying a few different pump times until you find your
perfect foam/hot milk ratio is recommended. This programming function is not available when the Cappuccino
function is turned off.
Cappuccino end wash
Follow the steps below to set the preferred amount of wash time after each cappuccino or coffee with milk:
DOSE PROGRAMMING
IN 30 SEC.
Fig. 03
CAPP. END WASH
0,XX s
Fig. 04
Note:
i
The end wash should be made longer if your machine only receives limited use each day (just one or two
cappuccinos or coffees with milk per hour) to ensure the milk system stays clean. If it is used regularly all day
long, then the end wash can be adjusted shorter or turned off. This programming function is not available when
the Cappuccino function is turned off.
18
1. Within the User Menu (see Fig. 01), press
menu's functions until PUMP & STEAM TIMES X,X S is shown (see Fig. 02),
then press OK to enter the menu.
2. Press
to increase the pump cycle time, or
+
adjustable from -2.0 to 2.0 seconds). Default is 0.0 seconds.
3. Press OK to save your setting then press
1. Within the User Menu (see Fig. 03), press
functions until CAPP. END WASH X,XX S is shown (see Fig. 04), then
press OK to enter the menu.
2. Press
to increase the amount of end wash time, or
+
second intervals from 0.00 (no end wash) to 1.00 second. Default is 0.50.
3. Press OK to save your setting then press
QUARTZ
ONE TOUCH
-
and
to scroll through the
+
-
to reduce it (time is
+
to return to the User Menu.
-
and
to scroll through the menu's
+
-
to reduce it in 0.25
+
to return to the User Menu.
Need help?
Do you have a question about the QUARTZ ONE TOUCH and is the answer not in the manual?
Questions and answers