Cappuccino Dispensing Order; Cappuccino Milk Frothiness - Expobar QUARTZ ONE TOUCH Technical Manual

USER PROGRAMMING

Cappuccino dispensing order

DOSE PROGRAMMING
IN 30 SEC.
Fig. 01
CAPPUCCINO MODE
Fig. 02
CAPPUCCINO MODE
COFFEE -> MILK
CAPPUCCINO MODE
MILK -> COFFEE
CAPPUCCINO MODE
COFFEE <--> MILK
Fig. 03

Cappuccino milk frothiness

Follow the steps below to set your preferred amount of milk froth for cappuccinos:
DOSE PROGRAMMING
IN 30 SEC.
Fig. 04
CAPP. STEAM
XX %
Fig. 05
Note:
i
The higher the percentage (%) setting, the more air is concentrated in the milk and the frothier it will be. This
programming function is not available when the cappuccino function is turned off.
There are 3 milk and coffee dispensing options for
cappuccinos:
Dispense coffee first, then add milk.
Dispense milk first, then add coffee.
Dispense coffee and milk simultaneously.
Follow the steps below to program the milk and coffee dispensing order for
cappuccinos:
1. Within the User Menu (see Fig. 01), press
functions until CAPPUCCINO MODE is shown (see Fig. 02), then press OK
to enter the menu.
-
2. Press or to scroll to the desired milk and coffee dispensing order; coffee
+
then milk, milk then coffee, or coffee and milk simultaneously (see Fig. 03).
3. Press OK to save your setting then press
Note:
i
This programming function is not available when the Cappuccino function
is turned off.
Note:
i
Coffee with Milk drinks will always be dispensed as milk first, then coffee.
This function is not adjustable.
1. Within the User Menu (see Fig. 04), press
functions until CAPP. STEAM XX % is shown (see Fig. 05), then press OK to
enter the menu.
2. Press to increase the amount of air in the froth, or
+
default setting is 50%.
3. Press OK to save your setting then press
QUARTZ
ONE TOUCH
-
and to scroll through the menu's
+
+
to return to the User Menu.
-
and to scroll through the menu's
+
-
to reduce it. The
+
to return to the User Menu.
17