Specifications New Elegance 2.1 External components Steam Tap Porta Filter Display Brewing group Electronic control panel Hot water outlet Main switch Steam wand Heat element light Brewing switch Adjustable leg Boiler Manometer 2.2. Specifications Boiler element 2F380+N 3F380+N 3F230 50/60 50/60 Hz (mm) Models Groups...
Specifications New Elegance 2.3. Boiler element. (*) The machine allows different final electrical set ups: 3 Phase 380 (2Ph380+N), 3 phase 220 (3ph220 or 2ph220) & single phase 230. Note1: 4500/2x1200 W means that the machine does never connect simultaneously all of its heating elements; whether it activates the 3050W heat element, or the other 2 of 1200W; but never at the same time.
Machine installation New Elegance READ CAREFULLY THIS INSTRUCTION MANUAL PRIOR TO INSTALL OR OPERATE THE ESPRESSO MACHINE. Machine installation When installing the machine on its cabinet, it should be as horizontal as possible (use its adjustable foots to achieve it), so the coffee will come out evenly to the cups, through all the spouts of each group.
Machine installation New Elegance 4.2. CONNECTION OPTIONS. Consult the nameplate on your machine as to know which is the electrical characteristics of the machine type that you have. Depending on it, you can connect your machine as follow: CONNECTION OPTIONS...
Machine installation FILLING UP THE BOILER New Elegance 4.4. FILLING UP THE BOILER. Visual Machines with electronic control panel: In this kind water level of machines the filling is automatic; the machine will fill the boiler by itself Machines without electronic control panel: In machines Water knob without electronic control panel (they...
5. FIRST START UP New Elegance 5.1. FIRST START UP • Open the external supply of water to the machine. • If the machine has visual level indicator, fill the boiler between the maximum and minimum level. • Turn on the main power switch. • Press the brew switch, or one selection on the control panel on each group, until water comes out continuously from each of them. This way the heat exchangers of the machine will be correctly filled. • Turn on the steam knob, until steam comes out. This way we will evacuate the remaining air that could be trapped in the boiler.
5. FIRST START UP New Elegance 5.3. COFFEE MACHINE WITH BUILT- IN GRINDER CORRECT POSITION OF THE PORTA-FILTER IN THE GROUP CORRECT NOT INSERTED THE GROUP ENOUGH JOINT IS WORN OUT 5.4. ESPRESSO BREWING • Unlock and remove the porta - filter from the group head. • Fill the basket filter of the porta-filter with the right amount of coffee (it will depend on the filter’s basket size). For best results use freshly grinded coffee. •...
6. COFFEE MACHINE WITH BUILT- IN GRINDER New Elegance 6.4. Adjusting the grinding degree of coffee You can adjust the grinding degrees (thinner ground coffee/coarser ground coffee) as follows: • If you want to obtain thinner grinded coffee: Maintain pressed the millstone trigger (5)(models till 2009) while turning right the setting grind wheel (4), then release the trigger.
7. CLEANING OF THE ESPRESSO MACHINE New Elegance Cleaning of the espresso machine Remember, as to get the best performance from the machine, descale and cleaning are to be observed. Disconnect the machine from the main supply prior to cleaning the machine.
7. CLEANING OF THE ESPRESSO MACHINE New Elegance Electronic control panel. Important: Once finished the cleaning process, remove the porta filter and run water through the group again to rinse out all remains. Repeat the cleaning process without detergent once more for a perfect result. “DO NOT MANIPULATE THE PORTA FILTER DURING THE AUTO - CLEANING PROCESS”.
8. ELECTRONIC CONTROL PANEL New Elegance 8.1. Electronic control panel. When having an electronic control panel (5 buttons per brewing group), the machine offers these additional capabilities: • Volumetric control of four different espresso doses per brewing group. • Time-controlled hot water dose’s control. (on customer’s request). • Automatic filling and level control of the boiler. • Automatic switch off of the heating element if not enough water. (on customer’s request) • System´s supervision through alarms. • Serial connection RS-232 with data-reading devices from the control panel to the computer. •...
8. ELECTRONIC CONTROL PANEL New Elegance 8.2. Programming dosage of the control panel Here we will program the volume of the coffee doses that will be automatically brewed by each selection on the keypad. • Keep pressed over 8 seconds the button of continuous coffee: all the lights in the keypad will light, but the light of the continuous coffee will flash. • Within 5 seconds press the button of the coffee selection to be re-programmed (1 short espresso - 1 long espresso – 2 short espressos – 2 long espressos).
8. ELECTRONIC CONTROL PANEL New Elegance 8.3. Example of 1 short coffee programming Unlock the porta filter from the machine and fill it with fresh ground coffee. Lock it into the brewing group head, place one cup beneath the spout. “*” Press the key pad and keep it pressed for over 8 seconds, until all the green lights are simultaneously flashing.
8. ELECTRONIC CONTROL PANEL New Elegance 8.4. Programming the dosis for hot water for infusions In machines that do not have a manual tap for hot water, this option will be enabled. Here how to adjust it: • Keep pressed over 8 seconds the continuous espresso key, till all the lights turn on, except the ones of continuous espresso, that will flash.
Aditional capabilities in machines with display New Elegance If, when having pressed one selection of the keypad, it takes more than 5 seconds for the electronics to receive impulses from the flow measurer (too thin grinded coffee or problems with the flowmeter), the light of the selected dosis will begin to flash. To disable this warning press again the same key. • Maximum security time: Every selection has a maximum allowed time for brewing of 5 minutes.
Aditional capabilities in machines with display New Elegance 9.2. Access to aditional menus • Keep pressed over 8 seconds the continuous espresso key on the left keypad. • (Entering programming). Now all the keypad lights will light up continuously, but the one of continuous erogation that will flash intermittently. At this point of the menu, we can adjust the volumes of the different dosis of each selection, as explained in previous point 8.1 “Programación de las dosis en la...
Aditional capabilities in machines with display New Elegance 9.3. Clock adjust: adjusting hour, minutes and day Once pressed the button “two short coffees” (OK) while “Clock adjust” was displayed, the adjusting of the clock begins. • Adjust the hour: while the hour is blinking, increase or decrease its value by pressing “+” (one short espresso) or “-“ (one long espresso). When the right value is reached, accept it by pressing “OK” (two short espressos). Then it begins with the minutes adjusting.
Aditional capabilities in machines with display New Elegance 9.5. Day Off adjustment If automatic On and Off times have been assigned, a day off can be enabled in which the machine will not switch on: the day off. Note that if the function of Auto On/Off was not enabled, this menu will not appear.
10. Possible anomalies New Elegance Possible anomalies 10.1. Failures produced by lime The coffee does not come out at a appropriate temperature: The outlet tubes of heat exchangers are clogged by lime. Water does not come out from the groups: Lime blocks the water getting through .
Page 24
New Elegance FOR SERVICE Retail dealer ................................................CREM International AB Box 10, Viksgränd 2, SE-670 40 Åmotfors, Sweden Tel: +46 (0)570-477 00, Fax: +46 (0)570-47719 E-mail: info.se@creminternational.com www.creminternational.com Art. nr. 1730124...
Need help?
Do you have a question about the New Elegance and is the answer not in the manual?
Questions and answers
Water pump not working
@Nick how do you start the machine to use first time