Table of Contents
Advertisement
INSTALLATION AND START-UP
Starting the machine
A
Fill the water tank to the max level (A).
If the machine is connected to the domestic water supply, water filling will begin automatically.
Connect the machine's plug to the electrical outlet (this should be done by a qualified person).
Turn on the main power switch (B).
When the machine is switched on, it may automatically go into STANDBY mode. To determine if the machine
is in STANDBY mode, confirm if the OK and Cappuccino
case, the machine must be changed to ON mode.
To change to ON mode, simply press the OK and Cappuccino
When the machine is in ON mode, five of the buttons will light up and the one remaining unlit button will begin
to cycle. The display will show PREHEATING XXX
When all the drink buttons are lit continuously (none flashing) the machine is ready for use.
The display will show the water temperature, time, (D) and EXPOBAR QUARTZ ONE TOUCH (E).
i
Note:
Keypad functions and explanations are found on page 13.
12
C until the boiler reaches operating temperature (C).
o
PREHEATING
C
o
XXX
118
o
C
07:53
D
ENJOY YOUR DRINK
B
buttons are flashing simultaneously. If this is the
buttons simultaneously.
C
EXPOBAR
E
QUARTZ ONE TOUCH
QUARTZ
ONE TOUCH
Advertisement
Table of Contents
Need help?
Do you have a question about the QUARTZ ONE TOUCH and is the answer not in the manual?
Questions and answers