Service Programming; Accessing The Service Menu Functions; Language Selection; Editing The Greeting Message - Expobar QUARTZ ONE TOUCH Technical Manual

SERVICE PROGRAMMING

Accessing the service menu functions

Follow the steps below to access the machine's service menu functions:
Press simultaneously.
Fig. 01

Language selection

Follow the steps below to change the display language:
LANGUAGE
XX
Fig. 04

Editing the greeting message

Follow the steps below to change the greeting message:
LANGUAGE
XX
Fig. 05
MESSAGE 1
EXPOBAR
Fig. 06
MESSAGE 2
QUARTZ ONE TOUCH
Fig. 07
26
1. Set the machine to STANDBY mode by pressing OK and Cappuccino
simultaneously for 5 seconds (see Fig. 01).
2. Within the STANDBY mode, press OK for 8 seconds, the display will
show LANGUAGE XX (see Fig. 03), which is the first option of the
Service Menu.
XXX ºC
STANDBY
Fig. 02
1. Enter the Service Menu, when LANGUAGE (see Fig. 04) appears press OK.
2. The currently selected language will flash. English is the default.
3. Press to scroll to the desired language, then press OK to confirm and
+
press + to move to the next menu option. Available languages: English, French,
German, Spanish.
1. Within the Service Menu (see Fig. 05), press + and - to scroll through
the menu's functions until MESSAGE 1 is shown (see Fig. 06).
2. Press OK to begin to edit the greeting message.
-
3. Press and to change each flashing character, then press OK to move the
+
next one.
4. When the desired message is input, press OK to scroll to the end (no
characters will be flashing) then press + to confirm the new message and
move to the second line of the greeting message (see Fig. 07), Repeat steps
2 and 3.
HH:MM
QUARTZ
ONE TOUCH
LANGUAGE
XX
Fig. 03