Adding Ld 800Dn Linking Device Unit; Inserting Ld 800Dn Linking Device Unit - ABB AC 800M Configuration

Section 4 Configuration
Table 16. Settings for CI873 EtherNet/IP Communication Interface Unit
Parameter
Configured 192.168.0.3
Primary IP
address
Configured 192.168.0.30
Backup IP
address
Subnet Mask 255.255.255.0

Adding LD 800DN Linking Device Unit

This section describes how to insert and configure LD 800DN linking device unit in
Control Builder.

Inserting LD 800DN Linking Device Unit

For inserting a new LD 800DN Linking Device Unit in the hardware tree, follow
these steps:
1.
9ARD000014-600 A
Default Value
Right-click the CI873 and select Insert Unit. The Insert Unit window appears
as shown in Figure 50.
Adding LD 800DN Linking Device Unit
Description
IP address of CI873
when configured in
single or the IP address
of Primary when
configured in
redundant.
IP address of Backup
CI873 when configured
in redundant.
Net mask
Consequence of Change
CI873 closes all the CIP
connections configured
and re-establishes with the
new IP address.
CI873 re-configures its
Ethernet interface with the
new IP address.
Communication with all the
devices stops. Connection
will be re-established, then
the communication
resumes.
109