ABB AC 800M Configuration page 112

Configuring LD 800DN Linking Device Unit
Parameter Data Type Unit
Vendor ID INT
Product INT
Type
Product INT
Code
Major INT
Revision
Minor INT
Revision
Electronic
Key
VendorID
112
Table 17. Settings for LD 800DN Linking Device Unit
Min
- - -
- - -
- - -
- - -
- - -
0 1
Editable
Max /Read
Only
Read ABB vendor Identification number.
Only
Read Device Type to identify the device
Only profile of LD 800DN as
Communication adapter
device(0x0C).
Read Identification number for the linking
Only device within the communication
adapter profile of adapter.
Read Major revision of the linking device.
Only
Read Minor revision of the linking device.
Only
Editable Criteria that can be specified by user
for LD 800DN to accept connection
from CI873 only when Vendor ID of
LD 800DN configured in Control
Builder matches with the Vendor ID of
LD 800DN device in the network.
Values are:
Enable Keying, Disable Keying
Upon modification, connection
between LD 800DN and CI873 gets
disconnected and connected again.
Hence communication with
DeviceNet slaves stop momentarily.
Section 4 Configuration
Description
9ARD000014-600 A