Status Handling For Ethernet/Ip Device - ABB AC 800M Configuration

Section 2 Functional Description
Bit Value
7 0x00000080 No
During the update of status information for a modular DeviceNet adapter, the I/O
modules configured under the adapter (the child units) are also updated with the
same status information. The Sub I/O modules that are configured with addresses
1 to 63 under the adapter are updated with status information.

Status Handling for EtherNet/IP Device

Table 8
and ExtendedStatus.
Bit Value
13 0x00002000 Connection
Error
14 0x00004000 Configuration
Error
31 0x80000000 Device Not
Found
9ARD000014-600 A
Table 7. Extended status of DeviceNet Device
Text Indication
Warning
Connection
Enabled
shows all EtherNet/IP device specific Unit Status bits in ErrorAndWarnings
Table 8. Errors and Warnings of EtherNet/IP device
Text Indication
Error
Error
Error
Status Handling for EtherNet/IP Device
Alarm/Event Severity
Alarm Low
Alarm/Event Severity
Alarm High
Alarm High
Alarm High
Description
Set when no
connections are
enabled for the device
Description
Set when connection
request from CI873
to this device returns
error.
Set when the CI
receives wrong
response when it
wrote configuration
data.
Set when the Device
is not present in the
network
39