ABB AC 800M Configuration page 160

Configuring S200 I/O Modules
Channel Name
Ctrl Out 1 Bit 14
Bit 15
Preset Out 0 Bits 00-15 Preset 0 - Value to load or compare with counter 0
Preset Out 1 Bits 00-15 Preset 1 - Value to load or compare with counter 1
The
output channels and the interpretation of data received on the Input channels for
200-IP4.
Channel Name
Value in Period16 0
Value in Period16 1
Value in Period16 2
Value in Period16 3
Value in Period32 0
Value in Period32 1
Value in Period32 2
Value in Period32 3
Value in Counter 0
Value in Counter 1
Value in Counter 2
Value in Counter 3
160
Table 27. Description of Channels for 200-IP2 (Continued)
Bit
Store Reset bit - A positive edge on this bit resets Store X in
Signals.
Store Reset bit - A positive edge on this bit resets Preset
Reached in Signals.
Table 28 below gives description about settings which needs to be applied on
Table 28. Description of Channels for 200-IP4
It gives 16 Bit period measurement for channel 0
It gives 16 Bit period measurement for channel 1
It gives 16 Bit period measurement for channel 2
It gives 16 Bit period measurement for channel 3
It gives 32 Bit period measurement for channel 0
It gives 32 Bit period measurement for channel 1
It gives 32 Bit period measurement for channel 2
It gives 32 Bit period measurement for channel 3
This channel shows pulse counter value for channel 0
This channel shows pulse counter value for channel 1
This channel shows pulse counter value for channel 2
This channel shows pulse counter value for channel 3
Section 4 Configuration
Definition
Definition
9ARD000014-600 A