Adding Sequence Logical Device - ABB COM600 series User Configuration Manual

3.3.
16
COM600 series 5.1
Sequence Control Configuration Manual
Figure 3.2-3 Adding Logic Processor IED object

Adding Sequence Logical Device

A corresponding Sequence Logical Device must be defined for each sequence in the
Logic Processor IED.
To add a Sequence Logical Device:
1. Right-click the Logic Processor IED and select New > Communication > Sequence
(see Figure 3.3-1).
Figure 3.3-1 Adding a Sequence Logical Device object to the Logic Processor IED
2. Rename the Sequence Logical Device with a suitable sequence name by editing the
caption parameter in the object properties window.
1MRS755001
SAB600_SC_PLC_IED.png
SAB600_SC_PLC_LD.png