ABB AC 800M Configuration page 84

I/O Settings
If the 64-bit data type is Dword, the data can be split into 2 Dword each of 32-bit
data type.
64 bit data of any other data type like Real and Integer is not supported.
84
Enter the port number in the Port Number field or select Use Default to
c.
set the default value.
Under Write Tag 1, enter or select the following details:
d.
Service ID: Select CIP Table Write Service from the drop-down list.
–
This is the vendor specific CIP service to be executed to read or write the
data.
Data Type: Select data type from the drop-down list. After data type is
–
selected, Configured channels window is opened as shown in
The data type is defined for each tag for the Class 3 connections. The
following are the supported standard data types:
– SINT
– INT
– DINT
– REAL
– BOOL
– DWORD
– USINT
– UDINT
– BYTE
– WORD
STRUCTURE. If this data type is selected, DataSize dialog box appears
–
as shown in Figure
No. of elements: Type the number of data elements of the particular data
–
type, that is read or written from or to Allen Bradley PLC device.
33.
Section 3 Device Import Wizard
9ARD000014-600 A
Figure 35.