ABB AC 800M Configuration page 241

Appendix A Troubleshooting EDS File
Sl
Message
No
75
The default value
is no longer in the
enum values,
therefore it will
automatically be
changed into
nearest value
76
Maximum number of
entries is reached
77
This will delete
all the existing
channels!
78
Out of Range
79
All channels
created for this
tag will be lost,
Do you want to
proceed?
9ARD000014-600 A
Table 41. Messages - Import of EDS Files (Continued)
Reason
When the default
value of the
parameter is not
available in the
range values.
When the number
of the entries
exceeds the total
number of
maximum number
of the values for the
enum and enum
range parameters.
To create the
channels based on
the selection
When the value
entered is not in the
range of the
minimum and
maximum value.
When datatype is
changed for the tag
in Class 3 for PLC
device type.
Applicability
Based on Device
Classification
EtherNet/IP/ Continue the import
with this message.
DeviceNet
EtherNet/IP/ Continue the import
DeviceNet with this message.
EtherNet/IP/ Continue the import
DeviceNet with this message.
EtherNet/IP/ Continue the import
DeviceNet with this message.
EtherNet/IP Continue the import
with this message.
Additional
Information and
Workaround
241