Adding Logical Device Objects; Adding Logical Node Objects; Adding Data Objects - ABB COM600 Series User Manual

3.3.6.
3.3.7.
3.3.8.
18
COM600 series, Version 5.0
DNP 3.0 Serial Master (OPC) User's Manual
With SCL import function, you can import new objects with configurations from an
existing file. Right-click the device and select SCL Import from the shortcut menu.
To import a new configuration file:
1. Click Choose File.
2. Browse to a new configuration file from the appearing dialog.
3. Select the file and click Open.
4. Select the device to import from the drop-down list. You can preview the configur-
ation on the right.
5. Click Import.
The new preconfigured objects appear in the object tree. If the configuration file is large,
the import may take time. To import a configuration file for a different device, right-
click the device, select SCL Import again and repeat the steps above.
For more information about the SCL Import function, see COM600 User's Manual.

Adding Logical Device objects

To add a Logical Device object:
1. Select a DNP IED object and right-click it.
2. Add a Logical Device object.
3. Rename the new object. The names of the Logical Device objects have to be unique.
Each physical device must have at least one Logical Device
object as a child object.

Adding Logical Node objects

To add a Logical Node:
1. Select a Logical Device object and right-click it.
2. Add a Logical Node object.
3. Rename the new object. The names of the Logical Node objects have to be unique.
You should have only one Logical Node 0 (LLN0) as a child
object to a Logical Device object.

Adding data objects

To add a data object:
1. Select a Logical Node object and right-click it.
2. Add a data object.
3. Rename the new object. The names of the data objects have to be unique.
1MRS756567