ABB AC 800M Configuration page 117

Section 4 Configuration
Table 17. Settings for LD 800DN Linking Device Unit (Continued)
Parameter Data Type Unit
Foreground Dint
to
Background
Poll Ratio
(3)
ADR Dint
I/O Enum
Connection
- Trigger
9ARD000014-600 A
Min Max
ms 1 32000
- - -
- 0 0
Configuring LD 800DN Linking Device Unit
Editable
/Read
Only
Editable Ratio of foreground to background
poll. If configured to poll at the
background rate, then, this parameter
sets the rate at which it's polled with
respect to scan cycle. This is valid
only for Poll.
Upon modification, communication of
linking device with all DeviceNet
devices is stopped momentarily.
The default value is 3.
Editable For setting Automatic Device
Recovery. It is enabled by default.
Enabling/disabling of ADR feature, in
turn automatically enables/disables
the Address Recovery feature.
Upon modification, communication of
linking device with all DeviceNet
devices is stopped momentarily.
Read The trigger type of the I/O
Only connection.
LD 800DN supports cyclic trigger
type only.
Description
117