ABB AC 800M Configuration page 205

Section 6 Linking Device LD 800DN
files and can be edited using any text editor. However, the LD 800DN must undergo
a power cycle for the changes to take effect.
Depending on the security settings, the system files may or may not be accessible
for normal users. System files include:
•
•
Configuration Files
ethcfg.cfg — This file contains the network configuration data and is read by the
module at start up. The settings in this file are affected by SSI commands. The
components and format of the file is shown in
[File path]
\user\eth_settings.cfg
[IP address]
10.10.12.212
[Subnet mask]
255.255.255.0
[Gateway address]
0.0.0.0
9ARD000014-600 A
Configuration Files (see
Password Files (see Password Files
Table 34. ethcfg.cfg Configuration File Format
Format
Configuration Files on page 205).
on page 207).
Table
Component
This is optional, and redirects the
contents of the file to another file path.
In this case the new file path is
\user\eth_settings.cfg
The new path permits normal users to
access the network configuration
settings.
Denotes the IP address. In this case, the
address is 10.10.12.212
Denotes the subnet mask. In this case, it
is
255.255.255.0
Denotes the gateway address. In this
case, it is
0.0.0.0
LD 800DN System Files
34.
205