ABB AC 800M Configuration page 115

Section 4 Configuration
Table 17. Settings for LD 800DN Linking Device Unit (Continued)
Parameter Data Type Unit
EtherNet Enum
Speed and
Duplex
(2)
MAC ID INT
9ARD000014-600 A
Min Max
0 4
- 0 63
Configuring LD 800DN Linking Device Unit
Editable
/Read
Only
Editable Speed and Duplex of the Ethernet
Port of Linking Device which are used
for its communication over the
EtherNet network.
Values are:
100Mbps Full Duplex,
100Mbps Half Duplex,
10Mbps Full Duplex,
10Mbps Half Duplex,
Auto Negotiation.
Upon modification, communication
with the Linking Device is stopped,
and resumes after the Linking Device
is reconfigured with the new value.
Editable The network address that the
LD 800DN uses on the DeviceNet
network.
Upon modification, communication
with the Linking Device and
DeviceNet devices is stopped and
resumes once the Linking Device is
configured with the new MAC ID.
The default value is 0 (zero)
Description
115