ABB AC 800M Configuration page 227

Appendix A Troubleshooting EDS File
Sl
Message
No
12
An error occurred
while the EDS file
was parsed.
Unfortunately no
more information
about the error are
available. Please
check the EDS file
13
Error occurred
14
Param section is
not as per CIP
standard. Please
retry with the
correct EDS file
9ARD000014-600 A
Table 41. Messages - Import of EDS Files (Continued)
Reason
Erroneous EDS file.
Any of the
mandatory fields in
EDS file is missing
or fields available as
not as per CIP
specifications.
This can occur due
to import if user
performs actions
before the parsing
activity is
complete.Check the
DIW log for more
information
Any of the
mandatory fields in
Parameter Section
required in EDS file
is missing or fields
available as not as
per CIP
specifications.
Applicability
Based on Device
Classification
Import will abort. 
EtherNet/IP/
DeviceNet Contact the vendor to
get device EDS files
with all the mandatory
fields.
EtherNet/IP/ Import will abort.
DeviceNet Check the DIW log for
more information.
Then start a fresh
import to come out of
the problem.
Import will abort. 
EtherNet/IP/
DeviceNet Contact the vendor to
get device EDS files
with all the mandatory
fields.
Additional
Information and
Workaround
227