Converting an EDS File to a Hardware Unit Type
Figure 8. Erroneous Welcome page
10. Click Cancel to exit from the import process.
Repeat the preceding steps to re-attempt the loading of the EDS file. If the
loading fails again, install Control Builder again.
11. Click Next in the Welcome screen of Device Import Wizard. Depending on
52
the EDS file initially selected in
displayed.
–
If the EDS file belongs to a non-modular device, then
Device
window appears as shown in
–
If the EDS file is an adapter's file, then
appears as shown in
Step
7, either of following windows are
Figure
Modular IO System
Figure
10.
Section 3 Device Import Wizard
General Purpose
9.
window
9ARD000014-600 A