ABB AC 800M Configuration page 65

Section 3 Device Import Wizard
Figure 19. Parameter Edit
In the Parameter Edit window, Name and Description field shows the name of the
selected module and the description provided by the vendor in the EDS file (if
available). Under Parameter, all the defined parameters with the corresponding
settings are shown in the same order as they will later appear in the Hardware editor.
If the data type selected is bool, it is not possible to edit the values for Min and
Max. It will not be possible to change the datatype of an enumrange parameter if
it is referenced by an analog channel.
9ARD000014-600 A
Double-click the values in the row to edit for columns Parameter Name,
b.
Link Path, Data Type, Default, Link Path and Unit.
File
65