ABB AC 800M Configuration page 64

File
13. Click Next from the File and Device Information window. The EDS file
Figure 18. EDS file import - Parameters setting
14. Select the EDS file in the left pane. The module name of the selected EDS file
64
import - Parameter Settings window is displayed as shown in
is displayed and Customize tab is enabled, in the right pane. List of parameters
is displayed in the drop-down list of the right pane as shown in
Click the Customize tab. The Parameters Edit window is displayed, as
a.
shown in Figure 19.
Section 3 Device Import Wizard
Figure
Figure
9ARD000014-600 A
18.
18.