ABB AC 800M Configuration page 240

Sl
Message
No
70
The value entered
already exists
71
Value is not within
Min and Max range
72
This is not a valid
Link path entry
73
Out of Range
74
invalid entry
240
Table 41. Messages - Import of EDS Files (Continued)
Reason
When the value
entered is already
existing in the range
values for
enumrange
parameter
When the value
entered is not in the
minimum and
maximum range for
the enumrange
parameter.
When the link path
is according to the
Epath syntax.
When the value
entered is in the
audiotape range in
minimum, maximum
and default values.
When the value
entered is not
having valid ASCII
characters.
Appendix A Troubleshooting EDS File
Applicability
Based on Device
Classification
EtherNet/IP/ Continue the import
DeviceNet with this message
after specifying valid
range value for the
parameter.
EtherNet/IP/ Continue the import
DeviceNet with this message.
EtherNet/IP/ Continue the import
DeviceNet after specifying a valid
link path value for the
parameter.
EtherNet/IP/ Continue the import
DeviceNet after specifying a valid
datatype value for the
parameter.
EtherNet/IP/ Continue the import
DeviceNet with this message.
Additional
Information and
Workaround
9ARD000014-600 A