Configure Camera Summaries; Camera Summary - Add, Edit And Delete A Storage Server - Canon VK-16 Setting Manual

Configure Camera Summaries

Camera Summary - Add, Edit and Delete a Storage Server

If you are using multiple Storage Servers, add each Storage Server as directed below.
You need not perform these steps if you are using only one Storage Server and that
Storage Server has already been added.
By adding the Storage Server, you can select the Camera Servers managed by the
Storage Server from the Viewer screen.
Note
Tip
●
Add the Storage Server
Note
56
If you are using the Viewer only, the Storage Servers tab is not
shown and you cannot add the Storage Server.
You can operate VK-64 with up to ten Storage Servers using any
Up to 192 Camera Servers can be operated.
● Do not add the same Storage Server more than once.
● If you add a Storage Server with a different configuration
(such as one managed by another Master Storage Server),
your original Locations and Zones will be lost.
● If you are using Windows XP SP2 or Windows Server 2003, you
need to change Windows settings. Make sure to change the
settings. Refer to "Administrator's Manual" for details.
● Do not change the port number.
In the Camera Summary window,
1
select the Storage Servers tab.
Click Add Storage Server.
2
The Add Storage Server dialog opens.
Enter connection settings
3
and click OK.