Canon VK-16 Setting Manual page 95

●
Step 7: Set the External Outputs
Click Settings ... to change the details of external outputs. Otherwise the default
2
settings will be used.
Available external outputs depend on the Camera Server.
Note
● Higher frame rates for "Max. Frame Rate" result in larger disk
usage. Make sure you have enough disk space.
Note
● Camera Servers have certain features to allow image capture
operations based on sensor input or schedule. If settings are
enabled on the Camera Server, they take precedence over any
settings made in VK-64/VK-16. This may cause some
confusion if your VK-64/VK-16 recording schedules fail to
record with the correct camera preset. You should disable
such Camera Server features if you wish VK-64/VK-16 settings
to take precedence.
Configure Motion and Sensor Settings
Click External Outputs
1
Setting to control any external
devices that may be connected
to your Camera Server.
If Setup... is clicked, click the
3
drop-down menu for the target
external device and set External
Outputs to On or Not Specified
on the External Outputs Setting
dialog.
6
95