Configure Motion and Sensor Settings
Note
Click OK to save the new settings and close the dialog.
Click Cancel to discard the new settings.
Note
Tip
90
● Available external outputs depend on the Camera Server.
● Certain Camera Servers have features to allow image capture
operations based on sensor input or schedule. If settings are
enabled on such a Camera Server, they take precedence over
any settings made in VK-64/VK-16. This may cause some
confusion if your VK-64/VK-16 recording schedules fail to
record with the correct camera preset. You should disable
such Camera Server features when using VK-64/VK-16 to
record images.
If the before event and after event fields are set to 0 seconds,
video will still be recorded while motion is detected.
Refer to the "Administrator's Manual" for important information
on Camera Server-based motion detection.