Setting up Event Notifications
Set up a user to receive Event Notification emails
The Storage Server Configuration dialog, Events and Event Notification tabs allow
you to set up event priorities and email notification to a particular user.
●
Adjust settings for the "Events" tab and "Event Notification" tab.
Tip
32
You can only register one e-mail address in the To Address field.
If you want to send the e-mail to multiple addresses, use a group
address.
Select a suitable event priority from the
drop-down menu for each event type listed.
The priority of an event created by a
manual recording using Record Now will
always be Priority 1. The priority cannot be
changed from this dialog.
The events associated with "Recording
engine started", "Data file set" and "User
log in" do not appear in a Viewer's
Timeline, Live Events Log or Event Search
Dialog. Refer to "Viewer Manual" for the
details.
Enable email notification and select a
priority. Events of that priority and above will
lead to notification emails.
Enter the email subject line, for example,
'Immediate Action Required'. Enter the
address of the recipient and enter your
from address.
Enter a Host Name or IP address and Port
Number of mail server for outgoing mail.
Enable authentication (POP-before-SMTP)
for connection and enter User Name,
Password and POP Server details.
If this is enabled, the Storage Server will
attempt to perform a POP login before
sending email that may be required for
some SMTP servers.