Canon VK-16 Setting Manual page 66

Using the Add Camera Server Dialog
●
Step 3: Update and setup camera thumbnail for Viewer
Note
Tip
Choose a pre-defined camera position (if already configured) from the Preset Angle
3
drop-down menu.
Tip
66
Move the mouse cursor around the image. Arrows
will appear and you can click and drag the cursor in
that direction. The preview will change accordingly.
When you move the mouse cursor to the center of
the image, a zoom in or zoom out control will
appear.
Hold down the mouse on "+" to zoom in.
Hold down the mouse on "-" to zoom out.
● For a VB-C50FSi and VB-C50Fi, only zoom is available.
● If a fixed camera or an external camera such as VC-C50i is
connected to VB-C50i, you cannot use pan, tilt, and zoom
operations.
If you want to change the thumbnail and the preview area is blank
(and the Update and Start Control buttons are disabled), click
Connect (located in the Connection Settings field).
Presets need to be configured in advance. Please refer to the
Camera Server User's Manual for details on making camera
presets.
In the Preview area, a camera view is
1
given. Click Update to grab a current
frame from the camera. Captured
image is shown in the thumbnail area,
and is used as the thumbnail image of
the Viewer screen.
If you are not happy with the frame,
2
click Start Control. You can then use
your mouse to redirect the viewing
angle and zoom in or out.