Message - Canon VK-16 Setting Manual

Configuring the Storage Server
●
Change the Logon Settings
Click OK.
3
Click Start Storage Server to start the Storage Server with the specified account.
4
Note

Message

●
When you have changed items affecting recording settings:
When you click Apply or End, the following message will appear.
"Item affecting recording setting has been changed.
To see how setting is affected, use Recording Setting Summary Display in the Recording
Schedules window of the Viewer."
●
When you have changed the Maximum retained history setting:
When you click Apply or End, the following message will appear.
"Changing the maximum retained history may delete recorded video. Are you sure to
continue?"
●
When you have added or deleted a network drive:
When you click Apply or End, the following message will appear.
"Drive configuration has been changed and Storage Server must be restarted. Are you
sure to restart Storage Server?"
30
If you are using VK-64/VK-16 with NAS server, you need to set up
log-on settings again after upgrading VK from v1.3 to v1.4.
If you need to log onto the
1
Storage Server with another
account when using a network
drive, click Stop Storage
Server. After the Storage Server
stops, click Logon Settings.
The Log on as dialog appears.
If you are logging onto the
2
Storage Server with a local
system account, select Local
System account. If you are
logging onto the Storage Server
with another account, enter the
account in This account and
password in Password.