Configuring The Storage Server - Canon VK-16 Setting Manual

Configuring the Storage Server

The Storage Server Configuration dialog, Settings tab allows you to configure:
● Storage Server name
●
Change the Storage Server Name
It is recommended to use an easy-to-understand name if you are
using multiple Storage Servers.
Tip
● Proxy Servers ● Recording options
Configuring the Storage Server
Click the icon of the toolbar or right-click the
title bar to display the About box.
Enter a name for your Storage Server.
Enter a proxy address for connecting to
Camera Servers.
Set Maximum retained history, Maximum
file size / duration and Low disk space
warning level.
Set maximum disk space used for each
device. Also, add or remove network
drives.
Storage Server status indicator. The Start
Storage Server and Stop Storage Server
buttons start and stop the Storage Server.
Click Apply to save changes when you
modify settings from each tab.
Enter a new name in Storage Server
Name to change the Storage Server
name (You can use up to 20 characters).
2
25