Add / Edit Schedule Item dialog - Schedule field
To set the schedule for a camera's recording period:
●
Step 1: Set the recording period
● An example time period could be for overnight recording such as
'Start: 22:00 to End 08:00'.
Tip
● Click All Day if you want 24 hour recording. The Start and End
times will be set at 00:00 respectively.
●
Step 2: Select the days for recording
● If you have defined any special day schedules, such as public
holidays, such schedules will override normal schedule times
Note
for the whole day.
● Times are given in 24 hours, for example 18:00 is 6:00 pm.
● If a Camera Server has been configured with Restrict Service
Time, VK-64/VK-16 will not be able to record from the Camera
Server during restricted times.
● The time zone used for the recording schedule will be the time
of PC where the Storage Server is running.
● The Storage Server will adjust for Daylight Savings if
configured in the operating system.
Configure Normal Recording
Click the time segments and
overwrite with desired time, or use
the up/down arrows.
In the Repeat on area, tick the days
you wish to repeat the recording
period you set in the Times area
above.
6
79