Overview - Canon VK-16 Setting Manual

Overview

●
VK-64/VK-16 is a software to view and record video images distributed from the
VB150 or a network camera VB-C300/VB-C50i/VB-C50iR/VB-C50FSi/VB-
C50Fi/VB-C10/VB-C10R (hereafter referred to as "camera server"). VK-64/VK-16
supports up to 64 camera servers via an IP network (e.g., LAN). Although VK-16
has the same basic functionalities as VK-64, it can support up to 16 camera
servers.
VK-64
VK-16
●
VK-64/VK-16 is a software program which consists of the Storage Server and Viewer.
The Storage Server can record videos and events (sensor input and motion detection)
data from multiple camera servers. The Viewer can display videos from multiple
camera servers in real time and play back videos recorded on the Storage Server.
●
The Viewer can be used by itself without connecting to the Storage Server (Some
functions such as video recording, sensor events, and motion detection, Capture
Still Frame are not available) (➝ P. 18, P. 42).
●
Video resolution can be as high as 640 x 480 pixels, 30 fps for NTSC and 25 fps
for PAL (depending on Camera Servers installed).
●
The following table shows each product and license number:
Product Name
Network Video Recorder VK-64 v1.4
Network Video Recorder VK-16 v1.4 *
Network Video Recorder VK-64 v1.4 Viewer
Network Video Recorder VK-64 v1.4 5 Viewers
* The Storage Server for VK-16 can register up to 16 camera servers. VK-16 and VK-64 uses the same Viewers.
* Licenses to the VK-64/VK-16 v1.1, v1.2 and v1.3 can be used for v1.4.
Storage ServerViewer
Up to 64 cameras can be registered
Up to 16 cameras can be registered
Functionality is the same as for VK-64
except for the above camera limitation.
Common
Storage Server Viewer
1 license 1 license
1 license 1 license
1 license
5 licenses
7