Canon VK-16 Setting Manual page 89

●
Step 4: Set the event priority status
●
Step 5: Set frame rate and pre and post event recording duration
Record for before event - enter a number of seconds for the amount of recording
2
time before the event occurs (up to a maximum of 30 seconds).
● If Continuous Recording is also set, Record for before event is
not available.
Note
● If Record for before event is set to one second or longer, it
may take approximately 10 seconds after event occurrence
until its display.
Record for after event - enter a number of seconds for the amount of recording
3
time after the event has transpired (up to a maximum of 999 seconds).
●
Step 6: Set the External Outputs
Configure Motion and Sensor Settings
In the Priority field, select the priority for the
event to be generated for this motion from a
menu of five options, ranging from 1. Highest
to 5. Lowest. Priorities are color-coded as
events in the Timeline in the Viewing Screen.
In the Record Video At field:
Max. Frame Rate - select a maximum
1
frame rate for recorded video from the
drop-down menu, or enter a value from
the keyboard. Choose from 0.1 to 30
frames per second (5 is the default).
Click the drop-down menu for
1
the target external device and
set On or Not specified.
6
89