Canon VK-16 Setting Manual page 93

●
Step 4: Set the Night Mode (VB-C300, VB-C50i/VB-C50iR, VB-
C50FSi, and VB-C50Fi)
●
Step 5: Set Additional Options (VB-C300)
● VB-C300 only allows these options to be used.
● If Exposure is set, the Backlight compensation option is set to
Note
Not Specified.
●
Step 6: Set frame rate and pre and post event recording duration
The frame rate specified is the frame rate that the Storage Server
will attempt to record, and may not be the actual frame rate used
Note
for recording video. Factors such as the number of Viewers, the
number of Camera Servers used, network traffic and load on the
Camera Server and the Storage Server may reduce the actual
frame rate recorded.
Configure Motion and Sensor Settings
Select the Night Mode (→ P. 91) from
the drop-down menu. You can select
from Disabled, Enabled, or Not
specified.
To use the exposure, white balance,
and/or focus settings on the Camera
Control Panel, tick the corresponding
check box.
In the Record Video At field:
Max. Frame Rate - select a
1
maximum frame rate for recorded
video from the drop-down menu,
or enter a value from the
keyboard. Choose from 0.1 to 30
frames per second (5 is the
default).
6
93