Canon VK-16 Setting Manual page 29

About Video Recording
If disk space is not enough to cover the specified value
Note
configured with Maximum disk space used, the retained
duration of recorded video may be shorter than the specified
period or the recording may be temporarily stopped. Please be
sure to perform sufficient tests before starting operations.
For details about disk space on the Storage Server, refer to
"Administrator's Manual".
Windows does not allow a user who has logged in with a local
system account (used for normal service management) to add a
network drive. The Add network drive and Delete network drive
items are disabled while you are logging into Windows with a
local system account. To set the network drive, click Stop
Storage Server to stop the Storage Server, and click the Logon
Settings and switch to an account which is allowed to use the
network drive (i.e., account with Windows' Administrator and
Logon As Service privileges). Refer to P. 31 for the Logon As
Service privilege.
You cannot use a UNC path or removable disk when adding a
network drive.
If you add or delete a network drive, the Storage Server
program will reboot.
Multiple Storage Servers cannot use the same network drive
simultaneously.
Single network drive cannot allocate to multiple drives.
Internal information (thumbnails, location, zone, and recording
schedules) related to a network drive will not be lost even if
the network drive is deleted. Therefore, if you add the same
network drive later, you can restore the status before deletion.
If the selected network drive cannot be accessed because the
network is disconnected, the selected drive is powered off, or you
entered a wrong path, the following error message will appear.
While the network drive is not operating (e.g., due to network
disconnection), video will not be recorded until the drive
recovers.
If a storage server is booted when the storage server is unable
to connect to a NAS server, video image data won't be written
to or recorded data won't be read from NAS server even after
the NAS server recovers. In such case, reboot the storage
server.
●
Start or Stop the Storage Server Program
If you need to stop the Storage Server Program first inform all
users connected to the storage server.
Tip
"Network path cannot be found."
Configuring the Storage Server
Click Stop Storage Server to stop the
Storage Server.
Click Start Storage Server to start the
Storage Server.
2
29