Add/Edit Schedule Item Dialog - Recording Settings Field - Canon VK-16 Setting Manual

Configure Normal Recording
Add / Edit Schedule Item dialog - Recording Settings field
To configure the Camera Server for recording:
●
Step 1: Set the recording mode
Select a frame rate for recorded video from the drop-down menu, or input a value
2
from the keyboard.
You can set the frame rate from 0.1 to 30 frames per second. The default is 5
frames per second.
Note
●
Select Motion Detection or Sensor Event recording (optional)
Click Settings... to change the details.
2
Click Settings... to change the details of each recording mode (→ P. 85, P.91).
3
80
● When the load on the storage server CPU and hard disk is
high, recording at the specified frame rate may not be
available, or the video recording may be interrupted.
● Higher frame rates for result in larger disk usage. Make sure
you have enough disk space.
● The frame rate specified is the frame rate that the Storage
Server will attempt to record, and may not be the actual frame
rate recorded. Factors such as the number of Viewers, load on
the Camera Server and the Storage Server, and network traffic
may reduce the actual frame rate recorded. Also, the
maximum frame rate for a VB-C10 configured with a resolution
of 640 x 480 is 10 frames per second, and for a VB150 with 4
cameras is 2-3 frames per second.
Click the Continuously at
1
Max. box if you want to set
continuous recording for the
duration of the time period.
Click the On motion detection
1
box if you want recording
activated when motion is
detected during this time
period.