Camera Summary - Find Camera Servers - Canon VK-16 Setting Manual

Configure Camera Summaries

Camera Summary - Find Camera Servers

You can easily locate and register Camera Servers via Find Camera Servers.
Note
●
Step 1: Click Find Camera Servers
The Search Results dialog opens and a list of detected Camera Servers will appear.
Note
Tip
60
When you initiate the Find Camera Servers function, your computer
searches the Viewer's local subnet for all Camera Servers connected
to it. It will not find Camera Servers on a different subnet where a
Storage Server may be connected. These Camera Servers must be
added using Add Camera Servers (→ P. 61).
The camera names listed are those specified by the Camera Server.
Refer to the Camera Server's User's Manual for more information
on setting the name ("Camera Name" for VB-C50i/VB-C50iR, VB-
C50FSi, VB-C50Fi and VB-C10/VB-C10R, "Device Name" for VB150,
"VB-C300NA" or "VB-C300PA" for VB-C300).
For the Camera Servers which are already registered, "Registered"
is displayed in the "Register" column. The "Register" column for
unregistered Camera Servers are blank.
In the Camera Summary window, click
Find Camera Servers which is located
above the right-hand panel.