IBM NeXtScale nx360 M4 Installation And Service Manual page 377

201-899-002 Standalone Memory Test Aborted
Explanation: Memory Diagnostics Test Aborted by
user.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
201-899-003 Standalone Memory Test Aborted
Explanation: Memory Diagnostics Test Aborted by
user.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
201-901-000 Standalone Memory Test Failed
Explanation: Memory Diagnostics Test Failed.
Severity: Error
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
5. Replace any DIMMS(s) mentioned in error, one by
one.
6. Make sure that all DIMMs are enabled in the
Configuration/Setup Utility program.
7. If failure remains, refer to "Troubleshooting by
symptom" in the system "Installation and Service
Guide" for the next corrective action.
201-901-001 Standalone Memory Test Failed
Explanation: Memory Diagnostics Test Failed.
Severity: Error
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
201-899-002 • 201-901-003
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
5. Replace any DIMMS(s) mentioned in error, one by
one.
6. Make sure that all DIMMs are enabled in the
Configuration/Setup Utility program.
7. If failure remains, refer to "Troubleshooting by
symptom" in the system "Installation and Service
Guide" for the next corrective action.
201-901-002 Standalone Memory Test Failed
Explanation: Memory Diagnostics Test Failed.
Severity: Error
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
5. Replace any DIMMS(s) mentioned in error, one by
one.
6. Make sure that all DIMMs are enabled in the
Configuration/Setup Utility program.
7. If failure remains, refer to "Troubleshooting by
symptom" in the system "Installation and Service
Guide" for the next corrective action.
201-901-003 Standalone Memory Test Failed
Explanation: Memory Diagnostics Test Failed.
Severity: Error
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
Appendix C. DSA diagnostic test results
359