IBM NeXtScale nx360 M4 Installation And Service Manual page 282

806f072b-2101ffff • 806f0813-2581ffff
806f072b-2101ffff A successful software or firmware
change was detected on system
[ComputerSystemElementName]. (IMM
Promotion/IMM Recovery)
Explanation: This message is for the use case when an
implementation has detected a Successful Software or
Firmware Change.
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0450
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
806f072b-2201ffff A successful software or firmware
change was detected on system
[ComputerSystemElementName]. (Bkup
Auto Update)
Explanation: This message is for the use case when an
implementation has detected a Successful Software or
Firmware Change.
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0450
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only. ROM
Recovery :
806f0807-0301ffff [ProcessorElementName] has been
Disabled. (CPU 1)
Explanation: This message is for the use case when an
implementation has detected a Processor has been
Disabled.
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0061
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
264
IBM NeXtScale nx360 M4 Type 5455: Installation and Service Guide
806f0807-0302ffff [ProcessorElementName] has been
Disabled. (CPU 2)
Explanation: This message is for the use case when an
implementation has detected a Processor has been
Disabled.
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0061
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
806f0807-2584ffff [ProcessorElementName] has been
Disabled. (All CPUs)
Explanation: This message is for the use case when an
implementation has detected a Processor has been
Disabled.
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0061
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only. One of
the CPUs :
806f0813-2581ffff A Uncorrectable Bus Error has
occurred on system
[ComputerSystemElementName].
(DIMMs)
Explanation: This message is for the use case when an
implementation has detected a Bus Uncorrectable Error.
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0240
SNMP Trap ID: 50
Automatically notify Support: Yes
User response:
1.
Check the system-event log.
2. Check the DIMM error LEDs.
3. Remove the failing DIMM from the system board.
4. Check for a server firmware update. Important:
Some cluster solutions require specific code levels