IBM NeXtScale nx360 M4 Installation And Service Manual page 225

40000083-00000000 The new minimum power cap
value has returned below the power cap
value.
Explanation: Minimum Power Cap exceeds Power
Cap recovered
Severity: Info
Alert Category: Warning - Power
Serviceable: No
CIM Information: Prefix: IMM and ID: 0131
SNMP Trap ID: 164
Automatically notify Support: No
User response: Information only; no action is
required.
40000084-00000000 IMM firmware mismatch
between nodes [arg1] and [arg2]. Please
attempt to flash the IMM firmware to
the same level on all nodes.
Explanation: A mismatch of IMM firmware has been
detected between nodes
Severity: Error
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: IMM and ID: 0132
SNMP Trap ID: 22
Automatically notify Support: No
User response: Attempt to flash the IMM firmware to
the same level on all nodes.
40000085-00000000 FPGA firmware mismatch
between nodes [arg1] and [arg2]. Please
attempt to flash the FPGA firmware to
the same level on all nodes.
Explanation: A mismatch of FPGA firmware has been
detected between nodes
Severity: Error
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: IMM and ID: 0133
SNMP Trap ID: 22
Automatically notify Support: No
User response: Attempt to flash the FPGA firmware to
the same level on all nodes.
40000083-00000000 • 40000089-00000000
40000086-00000000
Explanation: Test Call Home generated by user.
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0134
SNMP Trap ID:
Automatically notify Support: Yes
User response: Information only; no action is
required.
40000087-00000000
Explanation: Manual Call Home by user.
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0135
SNMP Trap ID:
Automatically notify Support: Yes
User response: IBM Support will address the problem.
40000088-00000000
Explanation: This message is for the use case where a
user restores a Management Controller configuration
from a file and it completes.
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0136
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.
40000089-00000000
Explanation: This message is for the use case where a
user restores a Management Controller configuration
from a file and the restoration fails to complete.
Severity: Error
Appendix A. Integrated Management Module II (IMM2) error messages
Test Call Home Generated by
user [arg1].
Manual Call Home by user
[arg1]: [arg2].
Management Controller [arg1]:
Configuration restoration from a file by
user [arg2] completed.
Management Controller [arg1]:
Configuration restoration from a file by
user [arg2] failed to complete.
207