IBM NeXtScale nx360 M4 Installation And Service Manual page 201

1. For 3.5-inch hard disk drive model, the ServeRAID SATA controller is available
only with the storage tray installed.
2. You must remove hard disk drive #6 (if there is one installed) before
connecting/disconnecting the configuration cable. See "Major components of
the storage tray" on page 11 for the drive bay series of the hard disk drives.
Configuration cable
Figure 117. 2.5-inch hard disk drive with ServeRAID SAS/SATA controller cable connection
Configuration cable
Figure 118. 1.8-inch hard disk drive with ServeRAID SAS/SATA controller cable connection
Power cable
Mini-SAS cable
Power cable
Mini-SAS cable
Chapter 5. Removing and replacing components
2.5-inch Hard disk
drive cage
1.8-inch solid-state
drive cage
183