Features And Specifications - IBM NeXtScale nx360 M4 Installation And Service Manual

The following notices and statements are used in this document:
v Note: These notices provide important tips, guidance, or advice.
v Important: These notices provide information or advice that might help you
v Attention: These notices indicate potential damage to programs, devices, or data.
v Caution: These statements indicate situations that can be potentially hazardous
v Danger: These statements indicate situations that can be potentially lethal or

Features and specifications

Use this information to view specific information about the compute node, such as
compute node hardware features and the dimensions of the compute node.
Notes:
1. Power, cooling, and chassis systems management are provided by the IBM
2. The operating system in the compute node must provide USB support for the
The following table is a summary of the features and specifications of the
NeXtScale nx360 M4 compute node.
Microprocessor (depending on the model):
Memory:
Integrated functions:
avoid inconvenient or problem situations.
An attention notice is placed just before the instruction or situation in which
damage might occur.
to you. A caution statement is placed just before the description of a potentially
hazardous procedure step or situation.
extremely hazardous to you. A danger statement is placed just before the
description of a potentially lethal or extremely hazardous procedure step or
situation.
NeXtScale n1200 Enclosure chassis.
compute node to recognize and use USB media drives and devices. The IBM
NeXtScale n1200 Enclosure chassis uses USB for internal communication with
these devices.
v Supports up to two multi-core microprocessors (one installed)
v Level-3 cache
v Two QuickPath Interconnect (QPI) links speed up to 8.0 GT per second
Note:
v Use the Setup utility to determine the type and speed of the
microprocessors in the server.
v For a list of supported microprocessors, see http://www.ibm.com/
systems/info/x86servers/serverproven/compat/us.
v 8 dual inline memory module (DIMM) connectors
v Type: Low-profile (LP) double-data rate (DDR3) DRAM
v Supports 4 GB, 8 GB, and 16 GB DIMMs with up to 128 GB of total
memory on the system board
v Support for UDIMMs and RDIMMs (combining is not supported)
v Integrated Management Module II (IMM2), which consolidates multiple
management functions in a single chip.
v Concurrent COM/VGA/2x USB (KVM)
Chapter 1. The IBM NeXtScale nx360 M4 Compute Node Type 5455
5