Flex States; Ethernet; Real Time Clock Synchronizing - GE L90 Instruction Manual

6.2 STATUS
The display shows both the current position and the full range. The current position only (an integer from 0 through 7) is the
actual value.
PATH: ACTUAL VALUES
 FLEX STATES

There are 256 FlexState
PATH: ACTUAL VALUES
 ETHERNET

These values indicate the status of the primary and secondary Ethernet links.
6
PATH: ACTUAL VALUES
 REAL TIME CLOCK
 SYNCHRONIZING
The RTC Sync Source actual value is the time synchronizing source the relay is using at present. Possible sources are:
Port 1 PTP Clock, Port 2 PTP Clock, Port 3 PTP Clock, IRIG-B, SNTP, and None.
6-8
 
STATUS

FLEX STATES

PARAM
Off
PARAM
MESSAGE
Off
PARAM 256: Off
MESSAGE
Off
TM
bits available. The second line value indicates the state of the given FlexState bit.
 
STATUS

ETHERNET

ETHERNET PRI LINK
STATUS: Fail
ETHERNET SEC LINK
MESSAGE
STATUS: Fail
ETHERNET TRD LINK
MESSAGE
STATUS: Fail
 
STATUS

REAL TIME CLOCK SYNCHRONIZING

RTC Sync Source:
None
GrandMaster ID:
MESSAGE
0X0000000000000000
Accuracy:
MESSAGE
999,999,999 ns
Port 1 PTP State:
MESSAGE
NO SIGNAL
Port 2 PTP State:
MESSAGE
NO SIGNAL
Port 3 PTP State:
MESSAGE
NO SIGNAL
PTP - IRIG-B Delta:
MESSAGE
999,999,999 ns
L90 Line Current Differential System
Range: Off, On
1: Off
Range: Off, On
2: Off

Range: Off, On
Range: Fail, OK
Range: Fail, OK
Range: Fail, OK
6.2.15 REAL TIME CLOCK SYNCHRONIZING
Range: See text below
Range: Any 8 octet value
Range: 0 to 999, 999, 999 ns
Range: Disabled, No Signal, Calibrating, Synch'd,
Range: Disabled, No Signal, Calibrating, Synch'd,
Range: Disabled, No Signal, Calibrating, Synch'd,
Range: -500,000,000 to +500,000,000 ns or
6 ACTUAL VALUES
6.2.13 FLEX STATES
6.2.14 ETHERNET
Synchronized
Synchronized
Synchronized
999,999,999 ns
GE Multilin