Security Menu - GE L90 Instruction Manual

8.2 CYBERSENTRY
a) CYBERSENTRY SECURITY SETTINGS
CyberSentry security settings are configured under Device > Settings > Product Setup > Security.
The following settings are available.
RADIUS Server Settings
SETTING NAME DESCRIPTION
Primary RADIUS IP IP address of the main RADIUS server.
Address Default value indicates no Primary
RADIUS server is configured, and hence
RADIUS is disabled.
8
Primary RADIUS authentication port
Authentication Port
Primary Accounting RADIUS accounting port
Port
Vendor ID An identifier that specifies RADIUS
vendor-specific attributes used with the
protocol
RADIUS Shared secret used in authentication. It
Authentication displays as asterisks. This setting must
(Shared) Secret meet the CyberSentry password
requirements.
RADIUS Authentication method used by RADIUS
Authentication server. Currently fixed to EAP-TTLS.
Method
8-6
Figure 8–3: CYBERSENTRY SECURITY PANEL
MIN
0.0.0.0
1
1
See the
following
password
section for
requirements
EAP-TTLS
L90 Line Current Differential System

8.2.2 SECURITY MENU

MAX DEFAULT
255.255.255.255 0.0.0.0
65535 1812
65535 1813
Value that
represents
General
Electric
255 characters N/A
EAP-TTLS EAP-TTLS
8 SECURITY
UNITS MINIMUM
PERMISSION
- Administrator
- Administrator
- Administrator
Administrator
- Administrator
- Administrator
GE Multilin