Flex States - GE L30 Instruction Manual

6.2 STATUS
The display shows both the current position and the full range. The current position only (an integer from 0 through 7) is the
actual value.
PATH: ACTUAL VALUES
 FLEX STATES

There are 256 FlexState
PATH: ACTUAL VALUES
 IEC 61850
 GOOSE UINTEGERS
6
The L30 Line Current Differential System is provided with optional IEC 61850 communications capability.
This feature is specified as a software option at the time of ordering. Refer to the Ordering section of chap-
ter 2 for additional details.
The IEC 61850 GGIO5 integer input data points are displayed in this menu. The GGIO5 integer data values are received
via IEC 61850 GOOSE messages sent from other devices.
PATH: ACTUAL VALUES
 ETHERNET

These values indicate the status of the first, second, and third Ethernet links.
6-8
 
STATUS

FLEX STATES

PARAM
Off
PARAM
MESSAGE
Off
PARAM 256: Off
MESSAGE
Off
TM
bits available. The second line value indicates the state of the given FlexState bit.
 
STATUS IEC 61850 GOOSE UINTEGERS
UINT INPUT
UINT INPUT
MESSAGE
UINT INPUT 16
MESSAGE
 
STATUS ETHERNET
ETHERNET PRI LINK
STATUS: Fail
ETHERNET SEC LINK
MESSAGE
STATUS: Fail
ETHERNET TRD LINK
MESSAGE
STATUS: Fail
L30 Line Current Differential System
Range: Off, On
1: Off
Range: Off, On
2: Off
↓
Range: Off, On
1
0
2
0
↓
0
Range: Fail, OK
Range: Fail, OK
Range: Fail, OK
6 ACTUAL VALUES
6.2.13 FLEX STATES
6.2.14 IEC 61850 GOOSE INTEGERS
6.2.15 ETHERNET
GE Multilin