GE L90 Instruction Manual page 492

6.3 METERING
The metered values for real, reactive, and apparent power, as well as power factor, are displayed in this menu. The "SRC
1" text will be replaced by whatever name was programmed by the user for the associated source (see

TEM SETUP SIGNAL SOURCES
g) ENERGY METERING
PATH: ACTUAL VALUES
 ENERGY
 SRC 1
6
The metered values for real and reactive energy are displayed in this menu. The "SRC 1" text will be replaced by whatever
name was programmed by the user for the associated source (see
Because energy values are accumulated, these values should be recorded and then reset immediately prior to changing
CT or VT characteristics.
h) DEMAND METERING
PATH: ACTUAL VALUES
 DEMAND
 SRC 1
6-18
SRC 1 APPARENT PWR
MESSAGE
c:
0.000
SRC 1 POWER FACTOR
MESSAGE
3:
SRC 1 POWER FACTOR
MESSAGE
a:
SRC 1 POWER FACTOR
MESSAGE
b:
SRC 1 POWER FACTOR
MESSAGE
c:
).
 
METERING SOURCE SRC 1
SRC 1 POS WATTHOUR:
0.000
SRC 1 NEG WATTHOUR:
MESSAGE
0.000
SRC 1 POS VARHOUR:
MESSAGE
0.000
SRC 1 NEG VARHOUR:
MESSAGE
0.000
 
METERING SOURCE SRC 1
SRC 1 DMD IA:
0.000
SRC 1 DMD IA MAX:
MESSAGE
0.000
SRC 1 DMD IA DATE:
MESSAGE
2001/07/31 16:30:07
SRC 1 DMD IB:
MESSAGE
0.000
SRC 1 DMD IB MAX:
MESSAGE
0.000
SRC 1 DMD IB DATE:
MESSAGE
2001/07/31 16:30:07
SRC 1 DMD IC:
MESSAGE
0.000
L90 Line Current Differential System
VA
1.000
1.000
1.000
1.000

ENERGY
Wh
Wh
varh
varh

SETTINGS

DEMAND
A
A
A
A
A
6 ACTUAL VALUES
SETTINGS

SYSTEM SETUP SIGNAL SOURCES
GE Multilin

SYS-
).