Getting Started; Important Procedures; Cautions And Warnings; Inspection Checklist - GE L90 Instruction Manual

1 GETTING STARTED

1 GETTING STARTED 1.1IMPORTANT PROCEDURES
Read this chapter to help guide you through the initial setup of your new L90 Line Current Differential System.
Before attempting to install or use the device, review all safety indicators in this document to help prevent injury,
equipment damage, or downtime.
The following safety and equipment symbols are used in this document.
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate
injury.
Indicates practices not related to personal injury.
1. Open the relay packaging and inspect the unit for physical damage.
2. View the rear nameplate and verify that the correct model has been ordered and delivered.
3. Ensure that the following items are included:
• Instruction manual (if ordered)
• GE EnerVista™ CD (includes the EnerVista UR Setup software and manuals in PDF format)
• Mounting screws
For product information, instruction manual updates, and the latest software updates, visit the GE Digital Energy website at
http://www.gedigitalenergy.com.
If there is any noticeable physical damage, or any of the contents listed are missing, please contact GE Digital
Energy immediately.
NOTE
GE DIGITAL ENERGY CONTACT INFORMATION AND CALL CENTER FOR PRODUCT SUPPORT:
GE Digital Energy
650 Markland Street
Markham, Ontario
Canada L6C 0M1
TELEPHONE: Worldwide +1 905 927 7070
Europe/Middle East/Africa +34 94 4854 88 54
North America toll-free 1 800 547 8629
FAX: +1 905 927 5098
EMAIL: multilin.tech@ge.com
HOME PAGE: http://www.gedigitalenergy.com/multilin
GE Multilin
Figure 1–1: REAR NAMEPLATE (EXAMPLE)
L90 Line Current Differential System

1.1 IMPORTANT PROCEDURES

1.1.1 CAUTIONS AND WARNINGS

1.1.2 INSPECTION CHECKLIST

1
1-1