GE C30 Instruction Manual page 181

Ur series
Hide thumbs Also See for C30:
Table of Contents

Advertisement

5 SETTINGS
Use the MENU key to go to the user displays menu to view the user-defined content. The current user displays will show in
sequence, changing every four seconds. While viewing a user display, press the ENTER key and then select the 'Yes"
option to remove the display from the user display list. Use the MENU key again to exit the user displays menu.
An example user display setup and result is shown below:
 USER DISPLAY 1
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
USER DISPLAYS
If the parameters for the top line and the bottom line items have the same units, then the unit is displayed on the
bottom line only. The units are only displayed on both lines if the units specified both the top and bottom line items
are different.
NOTE
GE Multilin
DISP 1 TOP LINE:
Current X
~
DISP 1 BOTTOM LINE:
Current Y
~
DISP 1 ITEM 1:
6016
DISP 1 ITEM 2:
6357
DISP 1 ITEM 3:
0
DISP 1 ITEM 4:
0
DISP 1 ITEM 5:
0
Current X
0.850
Current Y
0.327 A
C30 Controller System
Shows user-defined text with first tilde marker.
A
Shows user-defined text with second tilde marker.
A
Shows decimal form of user-selected Modbus register
address, corresponding to first tilde marker.
Shows decimal form of user-selected Modbus register
address, corresponding to second tilde marker.
This item is not being used. There is no corresponding
tilde marker in top or bottom lines.
This item is not being used. There is no corresponding
tilde marker in top or bottom lines.
This item is not being used. There is no corresponding
tilde marker in top or bottom lines.
Shows the resultant display content.
5.2 PRODUCT SETUP
5
5-55

Advertisement

Table of Contents
loading

Table of Contents