GE C30 Instruction Manual page 122

Ur series
Hide thumbs Also See for C30:
Table of Contents

Advertisement

4.3 FACEPLATE INTERFACE
b) HIERARCHY
The setting and actual value messages are arranged hierarchically. The header display pages are indicated by double
scroll bar characters (), while sub-header pages are indicated by single scroll bar characters (). The header display
pages represent the highest level of the hierarchy and the sub-header display pages fall below this level. The MESSAGE
UP and DOWN keys move within a group of headers, sub-headers, setting values, or actual values. Continually pressing
the MESSAGE RIGHT key from a header display displays specific information for the header category. Conversely, contin-
ually pressing the MESSAGE LEFT key from a setting value or actual value display returns to the header display.
HIGHEST LEVEL
 SETTINGS
 PRODUCT SETUP
 SETTINGS
 FLEXLOGIC
4
c) EXAMPLE MENU NAVIGATION
 ACTUAL VALUES
 STATUS
 SETTINGS
 PRODUCT SETUP
 SETTINGS
 FLEXLOGIC
 SECURITY
ACCESS LEVEL:
Restricted
 SECURITY
 DISPLAY
 PROPERTIES
FLASH MESSAGE
TIME: 1.0 s
4-24
 SECURITY
Press the MENU key until the header for the first Actual Values page appears. This
page contains system and relay status information. Repeatedly press the MESSAGE
keys to display the other actual value headers.
Press the MENU key until the header for the first page of Settings appears. This page
contains settings to configure the relay.
Press the MESSAGE DOWN key to move to the next Settings page. This page con-
tains settings for FlexLogic™. Repeatedly press the MESSAGE UP and DOWN keys
to display the other setting headers and then back to the first Settings page header.
From the Settings page one header (Product Setup), press the MESSAGE RIGHT
key once to display the first sub-header (Security).
Press the MESSAGE RIGHT key once more and this will display the first setting for
Security. Pressing the MESSAGE DOWN key repeatedly will display the remaining
setting messages for this sub-header.
Press the MESSAGE LEFT key once to move back to the first sub-header message.
Pressing the MESSAGE DOWN key will display the second setting sub-header asso-
ciated with the Product Setup header.
Press the MESSAGE RIGHT key once more and this will display the first setting for
Display Properties.
C30 Controller System
4 HUMAN INTERFACES
LOWEST LEVEL (SETTING
VALUE)
ACCESS LEVEL:
Restricted
GE Multilin

Advertisement

Table of Contents
loading

Table of Contents