GE C30 Instruction Manual page 70
Ur series
Hide thumbs
Also See for C30:
- Instruction manual (488 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (441 pages)
Table of Contents
Advertisement
3.3 DIRECT INPUT/OUTPUT COMMUNICATIONS
3
Figure 3–27: DIRECT INPUT AND OUTPUT SINGLE/DUAL CHANNEL COMBINATION CONNECTION
The interconnection requirements are described in further detail in this section for each specific variation of type 7 commu-
nications module. These modules are listed in the following table. All fiber modules use ST type connectors.
Not all the direct input and output communications modules outlined in the table are applicable to the C30. Use your
order code with the tables in chapter 2 to determine applicable options.
NOTE
Table 3–4: CHANNEL COMMUNICATION OPTIONS (Sheet 1 of 2)
MODULE
SPECIFICATION
2A
C37.94SM, 1300 nm, single-mode, ELED, 1 channel single-mode
2B
C37.94SM, 1300 nm, single-mode, ELED, 2 channel single-mode
2E
Bi-phase, 1 channel
2F
Bi-phase, 2 channel
2G
IEEE C37.94, 820 nm, 128 kbps, multi-mode, LED, 1 channel
2H
IEEE C37.94, 820 nm, 128 kbps, multi-mode, LED, 2 channels
2S
Six-port managed Ethernet switch with high voltage power supply
2T
Six-port managed Ethernet switch with low voltage power supply
72
1550 nm, single-mode, laser, 1 channel
73
1550 nm, single-mode, laser, 2 channels
74
Channel 1 - RS422; channel 2 - 1550 nm, single-mode, laser
75
Channel 1 - G.703; channel 2 - 1550 nm, single-mode, laser
76
IEEE C37.94, 820 nm, 64 kbps, multi-mode, LED, 1 channel
77
IEEE C37.94, 820 nm, 64 kbps, multi-mode, LED, 2 channels
7A
820 nm, multi-mode, LED, 1 channel
7B
1300 nm, multi-mode, LED, 1 channel
7C
1300 nm, single-mode, ELED, 1 channel
7D
1300 nm, single-mode, laser, 1 channel
7E
Channel 1: G.703, Channel 2: 820 nm, multi-mode
7F
Channel 1: G.703, Channel 2: 1300 nm, multi-mode
7G
Channel 1: G.703, Channel 2: 1300 nm, single-mode ELED
7H
820 nm, multi-mode, LED, 2 channels
7I
1300 nm, multi-mode, LED, 2 channels
7J
1300 nm, single-mode, ELED, 2 channels
7K
1300 nm, single-mode, LASER, 2 channels
7L
Channel 1: RS422, channel: 820 nm, multi-mode, LED
7M
Channel 1: RS422, channel 2: 1300 nm, multi-mode, LED
3-26
C30 Controller System
3 HARDWARE
GE Multilin
Advertisement
Table of Contents
