Time Of Day Timers; Flex States; Ethernet; Real Time Clock Synchronizing - GE C70 Instruction Manual

STATUS
The display shows both the current position and the full range. The current position only (an integer from 0 through 7) is the
actual value.

6.2.11 Time of day timers

ACTUAL VALUES  STATUS  TIME OF DAY TIMERS
 TIME OF DAY TIMERS

This menu displays the current state of each time of day timer.

6.2.12 Flex States

ACTUAL VALUES  STATUS  FLEX STATES
 FLEX STATES

6
There are 256 FlexState

6.2.13 Ethernet

ACTUAL VALUES  STATUS  ETHERNET
 ETHERNET

These values indicate the status of the first, second, and third Ethernet links.

6.2.14 Real time clock synchronizing

ACTUAL VALUES  STATUS  REAL TIME CLOCK SYNCHRONIZING
 REAL TIME CLOCK
 SYNCHRONIZING
6-6
SELECTOR SWITCH 2

POSITION: 0/7
TIME OF DAY TIMER 1:

Off
TIME OF DAY TIMER 2:

Off
TIME OF DAY TIMER 3:

Off
TIME OF DAY TIMER 4:

Off
TIME OF DAY TIMER 5:

Off
PARAM 1: Off

Off
PARAM 256: Off

Off
TM
bits available. The second line value indicates the state of the given FlexState bit.
ETHERNET PRI LINK

STATUS: Fail
ETHERNET SEC LINK

STATUS: Fail
ETHERNET TRD LINK

STATUS: Fail
RTC Sync Source:

None
C70 CAPACITOR BANK PROTECTION AND CONTROL SYSTEM – INSTRUCTION MANUAL
Range: Current Position / 7
Range: On, Off
Range: On, Off
Range: On, Off
Range: On, Off
Range: On, Off
Range: On, Off

Range: On, Off
Range: Fail, OK
Range: Fail, OK
Range: Fail, OK
Range: see below
CHAPTER 6: ACTUAL VALUES