Transducer Inputs/Outputs; Records; User-Programmable Fault Reports; Event Records - GE C70 Instruction Manual

RECORDS

The C70 is provided with optional GOOSE communications capability. This feature is specified as a
software option at the time of ordering. See the Order Codes section of chapter 2 for details.
The RxGOOSE Analog values display in this menu. The RxGOOSE Analog values are received via IEC 61850 GOOSE
messages sent from other devices.

6.3.8 Transducer inputs/outputs

ACTUAL VALUES  METERING  TRANSDUCER I/O DCMA INPUTS  DCMA INPUT xx
 DCMA INPUT xx

Actual values for each DCmA input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value followed by the programmed units.
ACTUAL VALUES  METERING  TRANSDUCER I/O RTD INPUTS  RTD INPUT xx
 RTD INPUT xx

Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value.
6.4 Records

6.4.1 User-programmable fault reports

6
ACTUAL VALUES  RECORDS  USER-PROGRAMMABLE FAULT REPORT
 USER-PROGRAMMABLE
 FAULT REPORT
This menu displays the user-programmable fault report actual values. See the User-Programmable Fault Report section in
chapter 5 for information on this feature.

6.4.2 Event records

ACTUAL VALUES  RECORDS  EVENT RECORDS
 EVENT RECORDS

6-20
DCMA INPUT xx

0.000 mA
RTD INPUT xx

-50 °C
NEWEST RECORD

NUMBER: 0
LAST CLEARED DATE:

2002/8/11 14:23:57
LAST REPORT DATE:

2002/10/09 08:25:27
EVENT: XXXX

RESET OP(PUSHBUTTON)

EVENT: 3

POWER ON
EVENT: 2

POWER OFF
C70 CAPACITOR BANK PROTECTION AND CONTROL SYSTEM – INSTRUCTION MANUAL
CHAPTER 6: ACTUAL VALUES
Date and time stamps
EVENT 3
 
DATE: 2000/07/14
EVENT 3

TIME: 14:53:00.03405